Liaoning Guomagnesium Refractory Materials Co., Ltd

The intermediate frequency furnace ramming and knotting of materials is a very important step, which directly affects the service life of the furnace. What should we pay attention to when constructing such an important step? Let's follow the editor to learn more about:

1. Firstly, standardize the operating process standards of the intermediate frequency furnace. In addition, before tying the materials in the intermediate frequency furnace, ensure the completeness of the power supply and water supply system. Before operation, all engineering personnel need to prepare in advance, and personnel are not allowed to bring any combustible materials into the work site.

2. During the process of ramming the material in the intermediate frequency furnace, the sand should be added in full at once, and it is absolutely not allowed to be added multiple times, as this will seriously affect the ramming effect. When adding sand, it is necessary to ensure that the sand is laid flat at the bottom of the furnace and cannot be piled up in a pile, otherwise it will cause particle size separation of the sand.

3. When the intermediate frequency furnace is used for ramming and tying materials, the operation should be carried out in a way of shaking first and then vibrating. During the operation, it should be light first and then heavy, and the rocker should be inserted all the way in one go, shaking eight to ten times each time.